Product ID:REZ URETHANE VARNISHES, 77-5
MSDS Date:11/09/1987
FSC:8010
NIIN:00N000188
MSDS Number: BRMHM

PPG INDUSTRIES INC

260 KAPPA DRIVE
PITTSBURGH, PA 15238
US

Emergency Phone: 304-843-1300

Info Phone: 412-492-5822

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

SOLVENT NAPHTHA PETROLEUM MEDIUM ALIPHATIC; (MEDIUM

CAS: 64742-88-7

Fraction By Weight: 55%

FILM FORMERS, RESINS & ADDITIVES

Fraction By Weight: 45%

PRODUCT IS CONTACTED BY FLAME OR HOT SURFACES.

RTECS: 9999999ZZ

CARBON MONOXIDE.

RTECS: 9999999ZZ

MATL; PERSISTENT SKIN/EYE IRRIT/BRTHG

RTECS: 9999999ZZ

TO DETERM TYPE OF AIRBORNE CONTAMS AGAINST WHICH

RTECS: 9999999ZZ

BELOW STATED LIM, & TO REMOVE DECOMP PRODS DURING

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INGEST:HARMFUL/FATAL IF
SWALLOWED. EYE:CAUSES IRRIT. REDNESS, ITCH, BURNING SENSATION &
VISUAL DISTURBS MAY INDICATE EXCESS CONT. SKIN:MAY CAUSE MOD IRRIT.
DRYNESS, ITCH, CRACKING, BURNING, REDN ESS & SWELL ARE CNDTNS ASSOC
W/EXCESS CONT. INHAL:VAP & SPRAY MIST MAY BE HARMFUL. VAP IRRITS
EYES, (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:NOSE & THROAT. RPTD EXPOS TO HIGH VAP
CONCS MAY CAUSE IRRIT OF RESP SYS & PERM BRAIN & NERV SYS DMG.
INTENT MISUSE BY DELIB CONC & INHAL CONTENTS CAN BE HARMFUL/FATAL.
EYE WATERING, HDCHS, NA US, DIZZ & LOSS OF COORD ARE INDICATIONS
THAT SOLV LEVELS ARE TOO HIGH. CHRONIC:AVOID LONG-TERM & RPTD CONT.

First Aid:INGEST:DO NOT INDUCE VOMIT. EYE:FLUSH IMMED W/PLENTY OF WATER
FOR @ LST 15 MINS. SKIN:REMOVE PROMPTLY BY WIPING, FOLLOWED BY
WATERLESS HAND CLEANER & SOAP & WATER. INHAL:REMOVE TO FRESH AIR.
APPLY ART F RESP & OTHER SUPPORTIVE MEASURES AS REQD. IF ANY OF
FOLLOWING OCCUR DURING/FOLLOWING USE OF PROD, CONT POIS CTL CTR,
EMER ROOM/MD IMMED, HAVE MSDS INFO AVAIL:INGEST; EXCESS EXPOS TO
CORR (ING 5)

Flash Point Method:PMCC
Flash Point:110F,43C
Lower Limits:0.8%
Extinguishing Media:USE NFPA CLASS B EXTINGS (CARBON DIOXIDE, DRY
CHEM/UNIVERSAL AQUEOUS FILM FORMING FOAM) DESIGNED TO EXTING NFPA
(SUPDAT)
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
WATER SPRAY MAY BE INEFT. WATER SPRAY MAY BE USED TO COOL CLSD
CNTNRS TO PVNT PRESS BUILD-UP & POSS(SUPDAT)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPKS & OPEN FLAMES. CLSD CNTNRS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. DO NOT APPLY ON HOT (SUPDAT)

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
NIOSH/MSHA APPRVD RESP & SKIN & EYE PROT SHLD BE PERMITTED IN AREA.
REMOVE ALL SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST,
VERMICULITE/OTHER ABSORB MATL & PLACE INTO CNTNRS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE >120F. STORE LG QTYS IN
BLDGS DESIGNED & PROT FOR STOR OF NFPA CLASS II COMBUST LIQS.
CNTNRS SHLD BE GROUNDED WHEN POURING.
Other Precautions:AVOID FREE FALL OF LIQS IN EXCESS OF FEW INCHES. IF
MATL IS PART OF MULTIPLE COMPONENT COATING SYS, READ MSDS(S) FOR
OTHER COMPONENT(S) BEFORE BLENDING AS RESULTING MIXT MAY HAVE HAZS
OF ALL OF ITS PA RTS.

Respiratory Protection:OVEREXP TO VAPS MAY BE PREVENTED BY ENSURING
VENT CONTROLS, VAP EXHST/FRESH AIR ENTRY. NIOSH/MSHA APPRVD
(TC-23C-) PAINT SPRAY/AIR SUPPLIED (TC-19C-) RESPS MAY ALSO REDUCE
EXPOS. READ RESP MFR'S INSTR UCTIONS & LITERATURE CAREFULLY (ING 6)
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF INGS BELOW LOWEST SUGGESTED EXPOS LIMS, LEL (ING 7)
Protective Gloves:NITRILE/NEOPRENE RUB/POLYVINYL ALCOHOL.
Eye Protection:CHEM WORK GOGG/FULL LGTH FCSHLD .
Other Protective Equipment:WEAR PROTECTIVE CLOTHING, INCLUDING
IMPERMEABLE APRON. CLEAN OR DISCARD CONTAMINATED CLOTHING & SHOES.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NOTE:THIS IS REFORMULATION. PART # INDICATOR "B" DENOTES NEWER PROD
THAN "A", 8010-00-N00-0188. INGS & OTHER CHANGES APPLY . EXTING
MEDIA:CLASS II COMBUST LIQ FIRES. FIRE FIGHT PROC:AUTOIGNIT/EX PLO
WHEN EXPOSED TO EXTREME HEAT. IF WATER IS USED, FOG NOZZS ARE PREF.
EXPLO HAZ:SURFS. TOX GASES MAY FORM WHEN (ING 3)

Boiling Pt:B.P. Text:>241F,>116C
Vapor Pres:<3
Vapor Density:HVR/AIR
Spec Gravity:0.8-1
Evaporation Rate & Reference:<10 (BUOAC=100)
Solubility in Water:<1%
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:63-66

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PRODS WHEN
HEATED. WELDING, BRAZING/FLAME-CUTTING ON SURFS COATED W/PROD MAY
PRDCE FUMES (ING 4)

Waste Disposal Methods:WASTE MATL MUST BE DISPOSED OF I/A/W FEDERAL,
STATE & LOCAL ENVIRON CONTROL REGS. EMPTY CNTNRS SHOULD BE RECYCLED
OR DISPOSED OF THROUGH AN APPROVED WASTE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.